Loading...
Serving Davie, FL and surrounding areas. (954) 872-1534
Your garage or living space deserves a floor that looks custom and holds up year after year - even in Davie's heat, humidity, and older slab conditions.
Metallic epoxy flooring in Davie is a thick, glossy coating poured over your concrete slab that creates a swirling, three-dimensional finish - similar to polished stone or flowing water, but bonded directly to your floor. Most residential installations cover a garage or living area in two to three days, with the floor ready for light foot traffic within 24 hours of the final coat.
Many Davie homeowners turn to metallic epoxy when they want a space that looks genuinely finished - not just coated. If your garage has become a home gym, workshop, or extra living area, bare concrete does not match that vision. Metallic epoxy transforms the look while giving you a surface that is easy to clean and resistant to the spills and scuffs that come with daily use.
In South Florida's climate, the preparation step matters more than the product itself. We always test your slab for moisture before applying anything - a detail that separates a floor that lasts a decade from one that bubbles within a year. If you are also considering a lower-maintenance option for high-traffic areas, urethane cement flooring is worth looking at as well.
Those white or grayish stains that appear on your slab after a heavy South Florida downpour are a sign that moisture is moving up through the concrete from below. This is especially common in Davie and Broward County because of the high water table. It is worth having a contractor assess the slab before coating - if moisture is addressed correctly first, a metallic epoxy floor will hold up for years.
If you notice small craters forming in the concrete surface, or the floor leaves a gray dust on your shoes, the top layer of the slab is breaking down. This is common in older Davie homes where the original concrete has been exposed to decades of humidity, oil drips, and cleaning chemicals. A metallic epoxy coating seals the surface and stops the deterioration from spreading.
If you have an older painted or coated floor starting to lift at the edges or form bubbles in the middle, the previous coating failed - usually because of moisture or poor surface prep. Rather than painting over the problem, a full strip-and-recoat with a properly applied metallic epoxy system will give you a lasting result instead of the same failure repeating in another year or two.
Many Davie homeowners are turning garages into home gyms, workshops, or extra living areas to take advantage of the year-round indoor-outdoor lifestyle here. A bare concrete floor does not fit that vision - it is dusty, hard to clean, and uninviting. Metallic epoxy transforms the space visually and makes it practical, easy to mop, resistant to spills, and finished rather than utilitarian.
Our metallic epoxy work covers residential garages, bonus rooms, screened lanais, and covered patios throughout Davie and Broward County. Every project starts with a full slab assessment and moisture test - we will not apply any coating over a slab that has not been properly evaluated. If your floor needs crack repair or an old coating stripped first, we handle that as part of the same job, not as an unexpected add-on. For spaces where a decorative finish is the goal and maximum durability is the priority, standard epoxy floor coatings are also available as a more straightforward alternative.
The metallic design is created by working the coating as it is applied - swirling, layering, and shaping it in real time to produce a look that is unique to your floor. After the metallic layer cures, a protective topcoat goes down over the entire surface. That topcoat determines the final sheen - from a soft satin to a high-gloss mirror finish - and is what keeps the design looking sharp under daily use.
Best suited for homeowners who want a custom, showroom-style finish on a garage, home gym, or bonus room floor.
Ideal for screened lanais and covered outdoor areas where homeowners want a finished look that holds up to South Florida's year-round use.
Right for floors with an existing failed coating - we remove the old material, repair the slab, and apply a fresh metallic epoxy system built to last.
For homeowners who want input on the final look - pigment combinations, swirl patterns, and topcoat sheen levels are all customizable.
Davie sits in Broward County, where average relative humidity stays above 70% for most of the year and the water table is notoriously high. Concrete slabs here absorb and release moisture constantly - a fact that disqualifies many standard coating products before the job even starts. Metallic epoxy, when applied by a contractor who tests first and preps correctly, is one of the few coating systems that handles South Florida's conditions reliably. A large share of Davie's single-family homes were built between the 1960s and 1990s, which means the slabs under many garages and living areas are 30 to 60 years old. Older slabs are more likely to have surface cracks, previous coatings that need stripping, or areas where the concrete has become porous - all things that need to be addressed before a new coating goes down, not after. Additionally, many Davie properties sit in FEMA-mapped flood zones, making a sealed, easy-to-clean floor surface particularly valuable after a rain event.
South Florida's rainy season runs from June through September, bringing daily afternoon thunderstorms and sustained high humidity. Epoxy coatings need stable temperature and humidity conditions to cure properly, so scheduling during the drier months - October through May - gives the best results. We serve homeowners across Davie and into neighboring communities like Cooper City and Plantation, where slab conditions and climate factors are similar. Whenever you are ready, we will assess your specific slab and tell you honestly what it needs before any coating goes down.
Call or submit a request online - we reply within one business day. We will schedule a free site visit to measure your space, look at the slab condition, and give you a written quote that breaks down exactly what is included.
Before any work begins, we test the concrete for moisture - this step is non-negotiable in South Florida. We also check for cracks, old coatings, or soft spots. If repairs are needed, we tell you upfront so there are no surprises on installation day.
We grind the concrete to create a proper bonding surface, then pour and work the metallic epoxy coating across the floor. Most residential garages are coated in a single day. A protective topcoat goes down after the metallic layer cures - this is what keeps the finish looking sharp long-term.
The floor needs at least 24 hours before foot traffic and 72 hours before vehicles. We walk the floor with you before we leave, explain exactly how to care for it, and check back in after the first week to make sure everything looks right.
Free on-site estimate. Written quote before any work starts. No pressure.
(954) 872-1534We test every slab for moisture before any coating goes down - a step many contractors skip in South Florida. This is the single most important factor in whether a metallic epoxy floor lasts 10 years or fails in 10 months.
We hold a current Florida state contractor license, verifiable through the Florida DBPR. Homeowners in Davie and Broward County can check our license status before signing anything - and we encourage it.
Your estimate is itemized and explained before any work begins - including what happens if we find a crack or a moisture issue during prep. You know the full number before you say yes, so there are no surprise charges at the end of the job.
We have worked on slabs throughout Davie and the surrounding area - older homes near the equestrian districts, newer subdivisions, and everything in between. Broward County slabs behave differently than concrete in a dry climate, and we know what to look for before we start.
Every one of these proof points comes back to the same thing: a floor that looks the way it did on day one, years after installation. That is what proper prep and honest communication deliver.
A flexible, seamless coating engineered to handle South Florida's moisture vapor and temperature swings - ideal for kitchens, utility rooms, and high-traffic areas.
Learn MoreA durable, color-rich floor coating system for garages, basements, and commercial spaces where function matters as much as appearance.
Learn MoreSpots fill up fast in the dry season - contact us today and we will schedule your on-site assessment within the week.