Loading...
Serving Davie, FL and surrounding areas. (954) 872-1534
Failed tile, peeling epoxy, or stubborn old adhesive left on the slab will cause the next floor to fail in the same spots. We strip down to bare concrete using dust-controlled equipment and test for slab moisture before we hand the job off.
Concrete floor stripping in Davie is the process of mechanically removing an existing floor covering - tile, vinyl, epoxy, or paint - down to the bare slab underneath. The concrete itself stays in place. The goal is a clean, consistent surface that a new floor can actually bond to. Most residential jobs in a single room or garage take one to two days.
In Davie, floor failures most often trace back to two things: moisture pushing up through the slab from Broward County's high water table, and old adhesive residue left behind when a previous floor was pulled. If either of those problems is present, any new flooring installed on top will fail in the same spots - sometimes within a year. Stripping the floor correctly and testing the slab before the next product goes down is what breaks that cycle.
Once the slab is clean, homeowners most often follow stripping with epoxy floor coatings for garages and utility spaces, or with concrete grinding and surface preparation to get the exact surface profile a new finish or flooring product requires.
When a floor covering starts failing in several places at once - not just one cracked tile - it usually means the bond between the floor and the concrete underneath has broken down. In Davie homes, this is often caused by moisture pushing up through the slab. Patching individual tiles at this point is a short-term fix; stripping the floor and addressing the root cause is the lasting solution.
If you peel back a corner of old vinyl or carpet and see dark staining or get a musty smell, moisture has been sitting between the floor covering and the concrete. This is a health concern as well as a structural one, and it is especially common in Davie homes where slab moisture is a persistent issue because of the high water table.
If a previous floor was removed but the adhesive was left behind, that sticky or hardened residue will prevent a new floor from bonding correctly. If the concrete feels tacky, has raised ridges, or shows a dark stain pattern where tiles used to be, the surface needs to be stripped clean before any new installation begins.
Garage floors and utility rooms in South Florida are often coated with epoxy or paint, and these coatings have a limited lifespan in the heat and humidity here. When the coating starts peeling in sheets or flaking underfoot, it cannot simply be painted over - the old coating needs to be fully stripped so the new one has a clean surface to grip.
We remove tile, vinyl, epoxy coatings, paint, and adhesive residue from residential concrete slabs throughout Davie. We use walk-behind grinders, scarifiers, and hand tools for edges and corners, with industrial vacuums attached to the equipment to control dust at the source. Slab moisture testing is included on every job - not as an add-on - because skipping it in Broward County is the most reliable way to end up with a failed floor within a year. Where our epoxy floor coatings service or another finish follows the stripping work, we coordinate the surface profile left on the slab to match exactly what that product requires for a proper bond.
For homes built before the mid-1980s, we assess whether the old adhesive may require testing for asbestos before mechanical removal begins. This is a legal requirement in Florida when applicable, and we handle the coordination rather than leaving it to you to figure out. After stripping, we do a hands-on surface check - running across the slab to confirm no thick ridges of adhesive or uneven patches remain - because a floor that passes a visual check but still has problem spots will cause the next installation to fail in exactly those places.
Best for homeowners replacing old ceramic, porcelain, or vinyl tile where adhesive residue was left on the slab after the tiles came up.
Suited to garages and utility rooms where a previous coating has peeled, bubbled, or simply reached the end of its useful life and needs to come off completely.
For living areas and kitchens where vinyl plank, sheet vinyl, or underlayment left a bond-breaking residue that prevents a clean new installation.
For slabs with multiple coating generations stacked on top of each other - common in older Davie homes that have had several flooring updates over the decades.
Most of Davie's housing stock was built between the 1960s and 1990s. At that age, many homes still have their original vinyl tile or sheet flooring installed with adhesives that may contain asbestos - a material that requires a licensed abatement contractor under Florida law before any grinding or mechanical removal starts. This is not a rare edge case; it is something we assess on every job in an older Davie home. The high water table in Broward County means slab moisture is also almost always a factor, and testing for it before the next floor goes down is non-negotiable if you want that floor to last.
We work on homes throughout Davie and neighboring communities, including homeowners in Hollywood and Dania Beach. In planned neighborhoods and HOA communities - which make up a significant share of the residential areas in this part of Broward County - we are already aware of the scheduling and access requirements many associations impose, and we confirm those details before the first day of work.
We ask a few basic questions about the area, floor type, and home age. Then we schedule a free on-site visit - usually within a business day - before giving you any price, because the condition of the slab changes what the job involves.
We inspect the floor for moisture, adhesive type, and any materials that need special handling. You get a written quote that spells out exactly what is included, what is not, and how long the job is expected to take.
The crew grinds and scrapes the floor covering and adhesive down to bare concrete. Industrial vacuums attached to the equipment capture most of the fine dust at the source. This phase typically takes one to two days for a single room or garage.
Once stripping is complete, we do a final surface inspection with you - confirming no sticky patches or uneven spots remain. If moisture testing was in scope, we review those results with you before leaving so you know exactly what the slab looks like.
We walk the floor, check for moisture and adhesive concerns, and give you a written price before we leave.
(954) 872-1534Broward County's water table is close to the surface, and moisture pushing up through a slab is the most common reason new floors in Davie fail within the first year. We test every slab and review the results with you before the project is finished - so whatever floor goes down next starts on a surface that is actually ready for it.
A significant portion of Davie homes were built in the 1960s through 1980s, when adhesives that may contain asbestos were in common use. We check for this during the walk-through and either test the material ourselves or coordinate with a licensed abatement contractor before any mechanical removal begins - so there are no surprises or work stoppages on the day of the job.
We use industrial vacuums attached directly to our grinding equipment on every job. In a South Florida home where air conditioning runs year-round, keeping concrete dust out of your vents, furniture, and air system is not a minor detail - and we take it seriously on every project.
We are fully licensed in Florida, we pull permits when required, and we give you the paperwork to prove it. This matters when you sell your home and a buyer's inspector asks about work history. Florida requires concrete contractors to hold an active state license, which you can verify through the Florida Department of Business and Professional Regulation before signing anything.
OSHA's crystalline silica standard sets requirements for dust control during concrete grinding - the same dust-controlled methods we use on every job. The EPA's asbestos guidance outlines why testing older adhesives before mechanical removal is a legal and health necessity - not an optional step. These are the standards we hold ourselves to on every stripping project in Davie and the surrounding Broward County communities we serve.
After stripping to bare concrete, epoxy coatings are one of the most durable and cleanable finishes available for garages and utility spaces.
Learn MoreMechanical grinding that profiles the slab surface and removes remaining residue to the exact texture a new coating or flooring product requires.
Learn MoreCall now and we will schedule your free on-site walk-through within a business day - no obligation, written quote before we leave.